Get Specs

Built in Woodlake, CA · Ships from Long Beach, CA

Turnkey cannabis grow rooms, containerized.

Flower, nursery, drying, and processing rooms built inside 40′ high-cube shipping containers in Woodlake, CA. Lighting, climate, fertigation, and monitoring come installed. Hook up power and water and you're growing in weeks.

  • $95K flower room
  • ~290 lbs AAA / yr
  • GAP & GMP spec
  • Stacks two high
Get specs & pricingTour a room
Unit
8′ × 40′ high-cube
Interior
9′6″ clear
Bench
5′9″ × 35′ rolling
Factory
Woodlake, CA

Lit from both sides of the leaf before it ever ships.

Twelve overhead LED bars and twenty-four under-canopy strips light the bench from above and below. Every fixture, sensor, and fertigation line is installed and tested at our Woodlake factory before a container leaves the yard.

You get a finished room, not a kit. Set it down, connect power and water, and start your first run.

See the spec sheet
A flower room container with its doors open on the build floor, LEDs, mini-splits, and rolling bench installed

One 40′ container. 290 lbs of AAA flower a year.

Here's what a single flower room does from the day it lands on your pad. Everything pinned below ships installed, wired, and tested.

  1. $95K

    Per room, fully built

    Buys a finished flower room: lighting, climate, CO₂, fertigation, and monitoring installed. No build-out crew, no construction loan.

  2. 50lbs

    AAA flower per harvest

    Off one 5′9″ × 35′ rolling bench, lit from above and below, with airflow and CO₂ pushed under the canopy.

  3. 290lbs

    AAA flower per year

    From a single container, year round. Need more? Add containers and stack them two high.

Running in weeks, not months. Set it down, hook up power and water, start your first run.

Inside a 40′ container flower room.

One 8′ × 40′ × 9′6″ high-cube container, purpose-built as a complete cultivation environment. Everything below ships installed.

  • 8′ × 40′ high-cube

    A 9′6″ interior fitted with a 5′9″ × 35′ gutter-style rolling bench for maximum canopy per square foot.

  • Enlight LED lighting

    Twelve 1,060-watt overhead LEDs plus twenty-four 120-watt under-canopy LEDs, all with remote access.

  • Climate dialed in

    Four 18,000 BTU/hr mini-splits with heat pump and dehumidification, controlled remotely.

  • Under-canopy airflow

    Temperature, humidity, and CO₂ pushed to the underside of the leaf and straight into the stomata.

  • CO₂ enrichment

    Enriched CO₂ for up to 30% more growth than ambient rooms.

  • Closed-loop fertigation

    Dual 0.33 GPH emitters per plant, plus a 200-pint/hour humidifier for early flower.

  • Aroya monitoring

    Aroya environmental and substrate sensors with an Open Sprinkler irrigation controller, all remote.

  • Delivered and running

    Delivery on request. Hook up power and water and you're running in a matter of weeks.

AAA flower, grown inside the box.

Recent runs from our flower room containers, shot on the bench under the same LEDs that ship with every build. Tap any photo to look closer.

Healthy roots, heavy harvests.

Under-canopy airflow and closed-loop fertigation work the root zone too. This plant came straight out of a flower room container: a dense, white root mass wrapped all the way around the pot.

Strong roots are where repeatable AAA harvests start.

A plant's root ball pulled from its pot, a dense white mass of roots

A container room for every stage, from nursery to distribution.

Start with flower, then add specialized rooms that scale together, one container at a time. Hover a container to look inside.

  1. Nursery

    Room 01

    Clean, uniform starts to keep your flower rooms full.

  2. Flower

    Flagship

    The full spec sheet above. About 290 lbs of AAA flower a year.

  3. Drying

    Room 03

    Stabilize the harvest in a controlled room.

  4. Post-harvest

    Room 04

    Trim, cure, and prep flower for processing.

  5. Processing

    Room 05

    Turn raw flower into product.

  6. Manufacturing

    Room 06

    Finish and package goods to spec.

  7. Distribution

    Room 07

    Stage finished goods and move them to market.

  8. Dispensaries

    End of line

    The end of the line: your product on the retail shelf.

Tour a running container grow room.

Walk the bench of a flower room container mid-run: the rolling bench, overhead and under-canopy LEDs, mini-splits, sensors, and fertigation lines, all plumbed and wired before it ships.

Built to GAP & GMP spec. Hook up power and water and it grows.

Spec your build
Walkthrough · 2 min

The lowest CapEx grow room on the market.

Containers stack two high, so your yard grows up instead of out. Forty double-stacked containers, with setbacks and aisleways, fit in about 13,500 ft² and produce close to 9,900 lbs of AAA flower a year.

Per square foot, fully built
~$296
Yard for 40 containers
13,500 ft²
AAA flower per year
~9,900 lbs
  • Built to GAP & GMP certification and specifications
  • Stackable two containers high
  • Permittable in all 50 states
  • Made at our Woodlake, CA factory. Ships internationally from Long Beach, CA

Get specs and pricing for your container build.

Interested in a flower, nursery, drying, processing, or distribution room? Send a message and we'll follow up with specs, pricing, and lead times.

  • Made in Woodlake, CA
  • Ships from Long Beach, CA
  • Running in weeks, not months